Projectiondesign F35 User's Guide download pdf (Page 27)

english

www.projectiondesign.com

6 Advanced setup

6.1 Controlling multiple projectors with remote control ID (RCID)

The remote control can be operated either in ‘broadcast mode’, or ‘individual mode’. When

several projectors are in use in an installation, individual control may be convenient. Individual

control is available either by wired remote control, using the data-jack, or by using an individ-

ual number code. For individual control, ﬁrst set the individual RC ID code using the projector

menu system, see the SETTINGS sub menu. Then, to select a speciﬁc projector to control,

ﬁrst press the ‘*’ button in the lower keypad area, then the code as set in the target projector.

A code can be in the range ‘0’..’99’. ‘0’ is reserved for broadcast. To select another target,

repeat the process by pressing ‘*’ and a new code. To exit individual control, press ‘*’’*’ twice

or press ‘*’ and ‘0’.

6.2 Protecting the projector with a pin code

The projector may be controlled by a PIN (Personal Identiﬁcation Number) code. The PIN

code is 4 digits, and if the PIN code is activated, you must enter the correct code to unlock

the projector. Factory set PIN (1234).

To activate, deactivate or change the PIN code, see the SETTINGS > PIN CODE sub menu.

NOTE! If an incorrect PIN code is entered, you may try again two times.

If you fail three times in a row, a PUK (unlock) code is needed. The PUK code is supplied

with the product.

WARNING! Entering the puk code correctly is the customers responsibility

If you also fail three times with the PUK code, the projector locks up permanently, and can

only be unlocked by a special service unlock code.

To access this code, you will need to contact your dealer or a service station. The service

unlock code will be generated based on a secure, encrypted number that is produced by the

projector itself. The projector will produce a new number every time.

NOTE! To unlock the projector, proof of ownership must be provided by the customer

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 41 42

No comments

Projectiondesign F35 User's Guide Page 27